Powersports / Motorcycles / Enduro / CRF250X / Specifications
2009 Honda CRF250X - Specifications
09/05/2008 - Torrance, Calif.
|Engine Type:||249cc liquid-cooled single-cylinderfour-stroke|
|Bore and Stroke:||78mm x 52.2mm|
|Valve Train:||Unicam, four-valve; 31mm intake valve; 26mm exhaust valve|
|Induction:||Keihin 37mm flat-slide carburetor with Throttle Position Sensor (TPS)|
|Ignition:||CD with electronic advance and lighting coil|
|Starting:||Electric and kick|
|Final Drive:||#520 T-ring-sealed chain; 13T/49T|
|Suspension||Front: 47mm inverted Showa cartridge fork with 16-position rebound and 16-position compression damping adjustability; 12.4 inches travel
Rear: Pro-Link Showa single shock with spring preload, 17-position rebound damping adjustability, and compression damping adjustment separated into low-speed (13 positions) and high-speed (3.5 turns); 12.4 inches travel
Front: Single 240mm disc with twin-piston caliper
Rear: Single 240mm disc
|Rake (Caster angle):||27.54o|
|Trail:||118mm (4.7 inches)|
|Seat Height:||37.7 inches|
|Ground Clearance:||13.6 inches|
|Fuel Capacity:||1.9 gallons|
|Curb Weight*:||253 pounds|
|*Includes all standard equipment, required fluids and full tank of fuel--ready to ride.
Consult owner's manual for optional racing parts.
Meets current CARB and EPA emissions standards.
California version differs slightly due to emissions equipment.
©2008 American Honda Motor Co., Inc. All Rights Reserved.