Powersports / Motorcycles / Sport Touring / ST1300/ST1300ABS / Specifications
2012 Honda ST1300 - Specifications
|Model:||ST1300 (with ABS)|
|Engine Type:||1261cc liquid-cooled longitudinally mounted 90° V-4|
|Bore and Stroke:||78mm x 66mm|
|Valve Train:||DOHC; four valves per cylinder|
|Induction:||PGM-FI with automatic enricher circuit, four 36mm throttle bodies, eight holes per injector|
|Ignition:||Computer-controlled digital with 3-D mapping and electronic advance|
|Suspension||Front: 45mm HMAS cartridge fork; 4.3 inches travel
Rear: HMAS gas-charged single shock with five-position spring preload adjustability; 4.8 inches travel
|Brakes||Front: Dual full-floating 310mm discs with CBS three-piston calipers with ABS
Rear: Single 316mm disc with CBS three-piston caliper with ABS
|Rake (Caster Angle):||26.0°|
|Trail:||98.0mm (3.9 inches)|
|31.1 inches (+/- 0.6 inch)|
|Fuel Capacity:||7.7 gallons|
|Estimated Fuel Economy:||35 mpg|
|Curb Weight*:||730 pounds|
*Includes all standard equipment, required fluids and full tank of fuel—ready to ride.
Honda's fuel-economy estimates are based on EPA exhaust emission measurement test procedures and are intended for comparison purposes only. Your actual mileage will vary depending on how you ride; how you maintain your vehicle; weather; road conditions; tire pressure; installation of accessories; cargo, rider and passenger weight; and other factors.
Meets current CARB and EPA standards.
©2011 American Honda Motor Co., Inc. • All Rights Reserved
Specifications subject to change.